USB Pendrive & Flash Drive Recovery India

Yes. A broken or bent USB connector is one of the most common pendrive failures we handle. Our micro-soldering specialists repair the broken traces on the PCB and either resolder the original connector or replace it with a new one. This works on SanDisk, Kingston, HP, Corsair, and all other USB flash drive brands. Most connector repairs are completed within 2 to 4 hours.

Yes, in most cases. Even if the USB stick is physically broken in half, the NAND flash memory chip that stores your data is usually intact. We perform a NAND chip-off extraction where we desolder the memory chip and read it directly using specialized NAND readers. We then reconstruct the data by reversing the controller's wear-leveling and error-correction algorithms. This process takes 24 to 48 hours.

Yes. Water damage is very recoverable for USB pendrives. The key is to NOT plug it in while wet, as this causes short circuits that can permanently damage the controller chip. Bring or send the pendrive to us as-is. We clean the PCB using ultrasonic cleaning, repair any corroded traces and solder joints, and recover the data. We have successfully recovered pendrives dropped in water, coffee, tea, and even washing machines.

Simple connector repairs take 2 to 4 hours. NAND chip-off recovery for dead controllers takes 24 to 48 hours. Water damage cases with corroded PCBs may take 2 to 3 days depending on the extent of corrosion. We begin analysis within 30 minutes of receiving your pendrive. For urgent cases, we offer priority lane service with dedicated engineers.

Our initial check-up is free, and we only charge if we successfully recover your files. This is written into our service agreement before we begin work. If the NAND flash memory cells are physically destroyed beyond repair (extremely rare), the cost to you is nothing. We have maintained this no-data-no-fee policy across all pendrive recovery cases since 2007.